ROCKSLIDERS THAT DON’T JUST LOOK GOOD

Designed to out-perform, Black Sheep’s rocksliders are manufactured from stainless steel with a black powder coated finish. These will definitely not rust or rot, even if you repeatedly subject them to unforgiving off-road conditions.

As the images depict, the combination of design and material strength results in a compact accessory that has minimal effect on the vehicles ground clearance. An additional useful feature are the two jacking points in each slider which are useful if you need to change a tyre of raise the vehicle out of soft terrain.

Finally, Black Sheep also offer a four-piece set of steps, made from powder coated aluminium, which bolt firmly to the rocksliders and facilitate accessing the vehicle as well as providing safe step to stand upon when reaching for items on the roof.

Weight (without steps): 30 kg / pair.

The rocksliders and a host of other accessories will be on display at Abenteuer & Allrad 2023.

Black Sheep Innovations | Booth: E03

The post Black Sheep Rocksliders for INEOS Grendier – protection, jacking point and a safe step appeared first on overland-europe.

This article is actually no. 4 in a short series covering Black Sheep’s most recent developments for the INEOS Grenadier.

CARGO SHEEP UNIVERSAL

The Cargo Sheep Universal load carriers are mounted to the lashing rails set into the roof and the waist level utility rails, meaning you don’t need to drill any holes.

Two vertical and two horizontal rails form the structure for mounting a wide range of accessories. In this particular example, the array of fixing points provide a versatile option for mounting sand boards or canister holders.

THE ONLY PRE-REQUISITE IS THAT YOU INCLUDE THE UTILITY RAILS WHEN YOU ORDER YOUR GRENADIER.

Weight (without accessories): 3 kg
Dimensions (LxWxH): 80 x 20 x 20 cm

BLACK SHEEP INNOVATIONS

The post Black Sheep Innovations – Cargo Sheep Universal: stows water and fuel canisters appeared first on overland-europe.

This article is actually no. 3 in a short series covering Black Sheep’s most recent developments for the INEOS Grenadier.

CARGO SHEEP M.O.L.L.E

For those who don’t know, M.O.L.L.E stands for MOdular Lightweight Load-carrying Equipment. The original system has its roots in the US where it has established itself amongst 4×4 drivers and accessory suppliers.

The availablilty of a wide range of accessories, such as panniers, tool holders, etc., led Thomas Grütter, ceo of Black Sheep Innovations, to maintain the grid dimensions for several reasons:

1. allow owners who are changing up to the Grenadier to continueuinsg their existing accessories
2. provide newcomers to the system a wider range of accessories for all kinds of applications right off the shelf
3. use a proven concept as the basis and create a system that would harmonise perfectly with the Grenadier

NO DRILLING

Black Sheeps M.O.L.L.E system mounts to the lashing rails set into the roof and the waist level utility rails. It’s a straight forward fit that needs no drilling and won’t leave scars on the car if you decide to resell at a later date.

The only pre-requisite: YOU MUST SPECIFY YOUR GRENADIER WITH UTILITY RAILS.

BLACK SHEEP INNOVATIONS | BOOTH E03

ABENTEUER & ALLRAD

The post Black Sheep Innovations – Cargo Sheep M.O.L.L.E for INEOS Grenadier appeared first on overland-europe.

Recently, Thomas Grütter, founder and ceo, explained to me that he has spent the last couple of years developing a new range of products especially for the INEOS Grenadier – a 4×4 he is convinced will make a considerable impact on the off-road and overlanding markets.

This is the first of a short series of articles aimed to shed light on Black Sheep’s new accessories for the Grenadier.

ROOF RACK / PLATFORM

Compared to the factory supplied roof rack, Black Sheep’s modular roof platform mounts directly to the lashing rails set along each side of the roof and only adds a mere 30 mm to the overall vehicle height. Manufactured from aluminium and stainless steel, the platform is sturdy enough to walk on.

A single element comprises the mounting legs and a panel fitted with airline rails around its parameter. The airline rails are identical to those mounted at the factory so that you can use the same fixtures on the whole car.

A single panel measures 63 x 160 cm, weighs 12 kg and has a static load bearing of 250 kg.

By using two elements and the optional filler, you can create a closed platform measuring 160 x 189 cm, ideal as a raised viewpoint for hunters as well as for photography and video work. A range of fixings are available to securely mount equipment such as Maxtrax, awnigs and roof top tents.

The design takes the safari roof windows into account so that they can still be used when the full-size platform is in place.

Black Sheep Innovations | info@blacksheep-innovations.com

The post Black Sheep Innovations – the Roof Rack System appeared first on overland-europe.